Reoptimization framework and policy analysis for maritime inventory routing under uncertainty

We study a maritime inventory routing problem, in which shipments between production and consumption nodes are carried out by a fleet of vessels. The vessels have specific capacities and can be chartered under different agreements. The inventory levels of all consumption nodes and some production nodes should be maintained within specified bounds; for the remaining production nodes, orders should be picked up within pre-defined time windows. We propose a discrete-time mixed-integer programming model. In the face of new information and uncertainty, this optimization model has to be re-solved, as the horizon is rolled forward. We discuss how to account for different sources of uncertainty. We present a rolling-horizon reoptimization framework that allows us to study different policies that impact the quality of the implemented solution, so we can identify the optimal set of policies.     

Water Sorption by Carbon Fibers

Protection of Metals and Physical Chemistry of Surfaces - The degree of crystallinity of carbon fibers (CFs) of different manufacturers has been determined by means of the Raman scattering method....     

Thermal Stability of Polymer Additives: Comparison of Decomposition Models Including Oxidative Pyrolysis

The thermo‐oxidative stability of widely used polymer additives has been investigated. A comparative analytical approach with classic and innovative decomposition models for polymer additives was conducted and the results supported using quantum‐chemical calculations. Unique pyrolysis products of the analytes were compiled utilizing pyrolysis online coupled to gas chromatography followed by mass spectrometric detection (Pyr‐GC–MS). The pyrolysis was either performed under inert conditions or in an oxygen‐containing atmosphere. Squalane was applied as polymer‐mimicking liquid next to low density polyethylene (LDPE) and polyamide 6 (PA 6) as matrices for 10 selected additives. The additives included in this study range from antioxidants and plasticizers to processing aids. These were selected to address a range of application in consumer products and to cover different chemical classes. The toxicological relevance of additives and potential breakdown products was considered. Consequently, degradation of sterically hindered antioxidants, diarylamines, and a trimellitic acid derivative was investigated. The findings were used to predict the behavior of consumer products made of polymeric materials entailing additives. The level of Antioxidant 2246 [2‐tert‐butyl‐6‐[(3‐tert‐butyl‐2‐hydroxy‐5‐methylphenyl)methyl]‐4‐methylphenol] and one of its predicted decomposition products was determined in baby bottle nipples made of natural rubber [2‐tert‐butyl‐4‐methylphenol] utilizing the complementary technique of gas chromatography coupled to tandem mass spectrometry (GC–MS/MS). This study provides a comprehensive characterization of important polymer additives and enables the prioritization of degradation products for further risk assessment. J. VINYL ADDIT. TECHNOL., 25:E12–E27, 2019. © 2018 The Authors. Journal of Vinyl and Additive Technology published by Wiley Periodicals, Inc. on behalf of Society of Plastics Engineers     

Broadband bowtie belt nanoantennas

In this article, we study a linear array of bowtie nanoantennas placed between two metallic strips that can work from 800 to 1420 nm (600 nm linewidth), with an electric field enhancement factor close to 20. We study the dynamical change of the position of the electric field enhancement amongst different elements in the array and, at the same time, the effects of dispersion on the scalability of the array elements. A systematic analysis and methodology to produce an array that can operate over a large bandwidth whilst maintaining the electric field enhancement without significant variation is provided.     

Upflow anaerobic sludge blanket (UASB) treatment of supernatant of cow manure by thermal pre-treatment.

Upflow anaerobic sludge blanket (UASB) methane fermentation treatment of cow manure that was subjected to screw pressing, thermal treatment and subsequent solid-liquid separation was studied. Conducting batch scale tests at temperatures between 140 and 180 degrees C, the optimal temperature for sludge settling and the color suppression was found to be between 160-170 degrees C. UASB treatment was carried out with a supernatant obtained from the thermal treatment at the optimal conditions (170 degrees C for 30 minutes) and polymer-dosed solid-liquid separation. In the UASB treatment with a COD(Cr) loading of 11.7 kg/m3/d and water temperature of 32.2 degrees C, the COD(Cr) level dropped from 16,360 mg/L in raw water to 3,940 mg/L in treated water (COD(Cr), removal rate of 75.9%), and the methane production rate per COD(Cr) was 0.187 Nm3/kg. Using wastewater thermal-treated at the optimal conditions, also a methane fermentation treatment with a continuously stirred tank reactor (CSTR) was conducted (COD(Cr) in raw water: 38,000 mg/L, hydraulic retention time (HRT): 20 days, 35 degrees C). At the COD(Cr) loading of 1.9 kg/m3/d, the methane production rate per COD(Cr), was 0.153 Nm3/kg. This result shows that UASB treatment using thermal pre-treatment provides a COD(Cr), loading of four times or more and a methane production rate of 1.3 times higher than the CSTR treatment.     

THE ORIGIN OF DOLOMITE IN THE ASMARI FORMATION (OLIGOCENE-LOWER MIOCENE), DEZFUL EMBAYMENT, SW IRAN

Dolomitisation is an important factor controlling reservoir quality in the Asmari Formation in many producing fields in SW Iran. Dolostones have higher average porosities than limestones. Petrographic and geochemical studies have been used to determine the causes of Asmari dolomitisation at the Bibi Hakimeh and Marun fields and at the Khaviz anticline. The formation is generally characterized by a large‐scale trend of upward‐decreasing accommodation. Basal strata were deposited under relatively open‐marine, high‐energy conditions, whereas the Middle to Upper Asmari succession was deposited in relatively protected settings with more frequent evidence of exposure and evaporitic conditions. There is a general upward increase in the abundance of both anhydrite (occurring as nodules and cement) and dolomite. Two main types of dolomite fabric are recognised, reflecting the textures of the precursor limestones: (1) finely crystalline pervasive dolomite (commonly <20μ) replacing mud‐rich facies; and (2) combinations of finely crystalline replacive dolomite and surrounding areas of coarser dolomite cement (crystals up to 100μ) in grain‐supported facies. Fluid inclusion data indicate that finely crystalline dolomites formed at low temperatures (ca. <50°C), while the coarser dolomite formed at higher temperatures (50–;140°C). Whole rock‐carbonate oxygen and carbon isotope analyses of pure dolostone samples show no apparent correlation with either depositional or diagenetic textures: δ¹⁸O is generally 0 to 2.7‰ PDB, and δ¹³C is ?1 to 4‰ PDB. The importance of evaporated seawater to Asmari dolomitisation is indicated by the ubiquitous occurrence of felty‐textured anhydrite nodules in dolostone beds and the presence of high‐salinity fluid inclusions in dolomite. The derivation of dolomitising fluids from contemporaneous seawater is supported by the general correspondence between age estimates derived from the strontium isotope composition of anhydrites and dolomites and those derived from stratigraphic considerations. This suggested synsedimentary dolomitisation. Dolomitisation of the upper half of the Asmari Formation may have occurred as a result of two syn‐sedimentary mechanisms: (1) by the reflux of evaporative brines concentrated in shallow lagoons or sabkhas, through immediately underlying strata (mainly during highstands); and (2) by the flushing of platform‐top carbonates by basinal evaporated waters during lowstand/early transgression. Continued dolomitisation during deeper burial is supported by the presence of high‐temperature fluid inclusions and iron‐rich crystal rims. Dolomite within the lower part of the Asmari Formation probably mostly formed during burial as a result of compaction of, and fluid exclusion from, the underlying Pabdeh marls and shales.     

The day of the week when you were born in 700 ms: Calendar computation in an autistic savant.

Some individuals are able to determine the weekday of a given date in a few seconds (finding for instance that June 12, 1900, was a Tuesday). This ability has fascinated scientists for many years because it is predominantly observed in people with limited intelligence and may appear very early in life. Exceptional visual memory, exceptional concentration abilities, or privileged access to lower levels of information not normally available through introspection have been advanced to explain such phenomena. In the present article, the authors show that a simple cognitive model can explain all aspects of the performance of Donny, a young autistic savant who is possibly the fastest and most accurate calendar prodigy ever described. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Time-resolved in-situ analysis of phase evolution for the directional solidification of carbon steel weld metal

Kinetic information about the phase transformation, during solidification process and solid-state transformation is essential to the material processing, such as welding. In our research group, in-situ phase identification system consisting of undulator beam and imaging plate have recently been used. The welding torch is driven by stepping-motor in the system. Those make possible that phase transformation can be identified in real-time under the condition of directional solidification and the spatial resolution of 100 × 500 μm. The time-resolution is 0.3125 seconds. In the present work, combination of analyzing method: the in-situ phase identification system, morphological observation by high-temperature laser scanning confocal microscopy and observation of microstructure at room temperature by OM, SEM and micro diffraction-system, is suggested to analyze the phase transformation during welding process. Phase transformation process of hypereutectoid carbon steel, during welding was analyzed as an example of combination observation.